LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Heater Inlet Pipe Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Partially drain the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL)  and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .
  2. Remove the heater pipe inlet hose (1) from the heater inlet pipe.
    Fig 1: Heater Pipe Inlet Hose
    G04842610Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the heater inlet pipe housing bolts (1).
    Fig 2: Heater Pipe Housing Bolts
    G04842611Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the housing.
  5. Remove the heater inlet pipe housing seal. Discard seal.
scientia non olet · About LEMON Manuals