LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Heater Inlet Pipe Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install a NEW heater inlet pipe housing seal.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the heater inlet pipe housing bolts (1).

    Tightening torque 

    Tighten the heater inlet housing bolts to 10 N.m (89 lb in)  .

    Fig 1: Identifying Heater Inlet Hose
    G04842613Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the heater inlet hose (1) to the heater inlet pipe.
  4. Refill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL)  and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .
scientia non olet · About LEMON Manuals