LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info./Horn >> Diagnostic Information and Procedures >> DTC P0520 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the EOP.
  2. Ignition ON, install a 3-amp fused jumper between the signal circuit and ground. Verify the scan tool Engine Oil Pressure Switch parameter is Low.
    • If not Low, test the signal circuit of the EOP switch for an open/high resistance. If the circuit tests normal, replace the ECM.
  3. If all circuits test normal, test or replace the EOP switch.