LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info./Horn >> Diagnostic Information and Procedures >> DTC B2750 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the C2 harness connector at the underhood fuse block.
  2. Connect a test lamp between the harness connector terminal 27 and battery voltage.
  3. Ignition ON, command the horn ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
    • If the test lamp is always OFF, test the horn relay control circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the BCM.
    • If the test lamp is always ON, test the horn relay control circuit for a short to ground. If the circuit tests normal, replace the BCM.
  4. If all circuits test normal, replace the underhood fuse block.