LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems >> Repair Instruction >> Relay Replacement (Within an Electrical Center) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the electrical center cover.
  2. Locate the relay. Refer to ELECTRICAL CENTER IDENTIFICATION VIEWS  to locate the electrical center where the relay exists.
    NOTE:
    • Always note the orientation of the relay.
    • Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
      Fig 1: Pulling Relay From Electrical Center
      G04844958Courtesy of SUZUKI OF AMERICA CORP.
  3. Using the J 43244 (1) position the tool on opposing corners of the relay (2).
    CAUTION: Use J43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the electrical center.
  4. Remove the relay (2) from the electrical center.
scientia non olet · About LEMON Manuals