Removal Procedure

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
Remove the front floor console. Refer to CONSOLE REPLACEMENT .
Ensure that the park brake lever is in the fully released position.

Fig 1: Identifying Front Cable Adjusting Nut
Courtesy of SUZUKI OF AMERICA CORP.
Release the tension from the park brake cable system at the front cable adjusting nut (1).
Using ONLY hand tools, loosen the adjusting nut (1) completely to the end of the front cable threaded rod.

Fig 2: Identifying Electrical Connector From Park Brake Warning Lamp Switch
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the electrical connector from the park brake warning lamp switch.

Fig 3: Identifying Park Brake Lever & Rear Park Brake Cable
Courtesy of SUZUKI OF AMERICA CORP.
With the park brake lever (1) in the released position, release the rear park brake cable (2) ends from the cable equalizer.
Release the rear cable fittings from the park brake lever bracket.

Fig 4: Identifying Park Brake Lever Mounting Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the park brake lever mounting nuts.
Remove the park brake lever assembly from the vehicle.