LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security And Locks >> Diagnostic Information and Procedures >> Liftgate Release Inoperative >> Component Testing >> Liftgate Latch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Latch

  1. Ignition OFF, disconnect the harness connector at the liftgate latch.
  2. Install a 15-amp fused jumper wire between the control circuit terminal 1 and 12 volts. Install a jumper wire between the ground circuit terminal 3 and ground. Verify the release actuator activates.
    • If the actuator does not perform as specified, replace the liftgate latch.