Transmission Oil Changing
- Operate the engine until it comes to normal operating temperature.
Specifications: The coolant temperature is 80-90°C (176-194°F).
- Stop the engine and raise the vehicle.
- Drain the fluid after removing the drain plug.
- Install the drain plug and tighten it securely after coating sealant.
- Remove the oil level plug and replenish the fluid until it begins to run out.
- Reinstall the oil level plug and tighten it securely.
Specifications
- The fluid specification is 75W-85 (GL-4).
- The fluid capacity is 2.1L (2.21 qt).
CAUTION:
Refer to Vehicle Lifting Caution
.