Cause of Failure
- Shift solenoid 1 (SS1)
- The inside valve body
- The TCM
DTC P0752
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Automatic Transmission? | Go to Step 2 | Go to Diagnostic System Check - Automatic Transmission |
| 2 |
|
Go to Step 3 | Go to Step 6 |
| 3 |
|
Go to Step 4 | Go to Step 6 |
| 4 |
|
Go to Step 5 | Replace the TCM. |
| 5 |
|
Go to Step 7 | Go to Step 8 |
| 6 | Repair the temporary connection failure of the connector. Refer to Wiring Harness and Connector Inspection Diagnosis
. Did you complete the repair? |
System OK | - |
| 7 | Replace the valve body assembly. Refer to Control Valve Body Disassemble
. Did you complete the replacement? |
System OK | - |
| 8 | Replace SS 1. Did you complete the replacement? |
- | Go to Step 7 |