Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Check Valve Spring Bolts	6.5 N.m	57 lb in
Control Cable Adjusting Nut	8 N.m	71 lb in
Damping Block Connection Nut and Bolt	80 N.m	59 lb ft
Differential Case-to-Differential Ring Gear Bolt	102 N.m	75 lb ft
Drain Plug	17 N.m	13 lb ft
Fluid Cooler Inlet Pipe Bolt	9 N.m	80 lb in
Fluid Cooler Inlet Pipe Fitting Nut	35 N.m	26 lb ft
Fluid Cooler Rear Outlet Pipe Clip Bolt	9 N.m	80 lb in
Fluid Cooler Rear Outlet Pipe Fitting Nut	35 N.m	26 lb ft
Front Outlet Pipe Clip Bolt	9 N.m	80 lb in
Front Outlet Pipe Union Bolt	35 N.m	26 lb ft
Input Speed Sensor Retaining Bolt	5.4 N.m	48 lb in
Manual Detent Spring Bolt	9.8 N.m	87 lb in
Manual Valve Lever Shaft Nut	12 N.m	106 lb in
Lower Transaxle-to-Engine Retaining Bolts	73 N.m	54 lb ft
Lower Transaxle-to-Engine Retaining Bolts	31 N.m	23 lb ft
Lower Transaxle-to-Engine Retaining Bolts	21 N.m	15 lb ft
Oil Pan Bolts	7 N.m	62 lb in
Oil Pump Bolts	25 N.m	18 lb ft
Oil Reservoir Lock Plate Bolts	5.4 N.m	48 lb in
Oil Strainer Bolts	9.8 N.m	87 lb in
Output Speed Sensor Retaining Bolt	7.4 N.m	65 lb in
Park/Neutral Position Switch Bolts	5.4 N.m	48 lb in
Parking Lock Pawl Bracket Bolts	7.4 N.m	65 lb in
Planetary Ring Gear Nut-Maximum	29 N.m	22 lb ft
Planetary Ring Gear Nut-Standard	9.8 N.m	87 lb in
Rear Mounting Bracket Bolts	60 N.m	44 lb ft
Screw Plugs	7.4 N.m	65 lb in
Shift Control Lever Assembly Mounting Bolts	8 N.m	71 lb in
Shift Solenoid Valve Bolts	11 N.m	97 lb in
Stator Shaft Bolts	25 N.m	18 lb ft
TCM Retaining Bolts	5 N.m	44 lb in
Torque Converter Bolts	45 N.m	43 lb ft
Transaxle Apply Clamp Bolt	5.4 N.m	48 lb in
Transaxle Case Plate Bolt	9.8 N.m	87 lb in
Transaxle Housing Bolts	29 N.m	22 lb ft
Transaxle Rear Cover Bolts	25 N.m	18 lb ft
Unions	25 N.m	18 lb ft
Upper Transaxle Mounting Bracket Bolts	60 N.m	44 lb ft
Upper Transaxle-to-Engine Mounting Bolts	73 N.m	54 lb ft
Valve Body Bolts	11 N.m	97 lb in