LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - AISIN 81-40LE - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - On Vehicle >> Transmission Fluid Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Transmission Fluid Temperature Sensor
    GM1774675Courtesy of GENERAL MOTORS CORP.
  1. Coat a new O-ring with ATF, then install it on the harness connector.
  2. Install the TFT sensor and wiring harness into the transaxle case.
  3. NOTE: Refer to Fastener Notice .
  4. Install the wiring harness retaining bolt.

    Tighten:  Tighten the bolt to 5.5 Nm (48 lb-in).

  5. Fig 2: Solenoid Wiring Harness Assembly
    GM1774664Courtesy of GENERAL MOTORS CORP.
  6. Connect the wiring harness to the five solenoids.
  7. Fig 3: Transmission Pan Bolts
    GM1774660Courtesy of GENERAL MOTORS CORP.
  8. Install a new gasket on the oil pan, then install the oil pan to the transaxle with the 18 retaining bolts.

    Tighten:  Tighten the bolts to 7.5 Nm (65 lb-in).

  9. Fill the transaxle with transmission fluid. Refer to Transmission Fluid Draining .