LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Wheel Stud
    GM65317Courtesy of GENERAL MOTORS CORP.
  1. Install the wheel stud (3) into the stud hole.
  2. Install 3 washers (1) and a wheel nut (2) onto the stud.
  3. Install 2 wheel nuts onto 2 studs.
  4. Use a pry bar on the 2 nuts in order to prevent the hub from turning.
  5. Tighten the wheel nut in order to seat the stud.
  6. Remove the 3 wheel nuts and the 3 washers.
  7. Install the brake drum. Refer to Brake Drum Replacement .
scientia non olet · About LEMON Manuals