Removal Procedure
- Raise and suitably support the vehicle. Use a frame contact hoist if possible and support the rear control arms with jack stands. If it becomes necessary to lift the vehicle with a twin-post hoist, lift the body and support the control arms with jack stands.
- Remove the wheel. Refer to Tire and Wheel Removal and Installation .
- Remove the right and the left shock absorber bolts. Refer to Shock Absorber Replacement .
- Lower the rear axle and remove the springs and the top insulator.
CAUTION:
When removing the rear springs, do not use a twin-post type hoist. The swing arch tendency of the rear axle assembly when certain fasteners are removed may cause it to slip from the hoist which may cause personal injury.
NOTE:
Refer to Vehicle Lifting and Jacking Notice
.