LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Stabilizer Shaft-To-Knuckle Nut & Shaft-To-Link Nut
    GM1241958Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft into the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

    Tighten:  Tighten the stabilizer shaft link nuts to 50 N.m (37 lb ft).

  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals