LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the passenger air bag module.
    2. Fig 1: Air Bag Module Mounting Bolts
    GM1724866Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the passenger air bag module mounting bolts to the tie bar.

    Tighten:  Tighten the passenger air bag module mounting bolts to 15 N.m (11 lb ft).

    3. Fig 2: Passenger Air Bag Module Mounting Bolts
    GM1724868Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the passenger air bag module mounting bolts to the upper instrument panel.

    Tighten:  Tighten the passenger air bag module mounting bolts to 6 N.m (53 lb in).

  4. Install the instrument panel. Refer to Instrument Panel Assembly Replacement .
    5. Fig 3: Passenger Air Bag Yellow Electrical Connector
    GM1724863Courtesy of GENERAL MOTORS CORP.
  5. Connect the passenger air bag yellow electrical connector (1).
  6. Install the glove box. Refer to Instrument Panel Compartment Replacement .
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals