LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Front End Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Air Bag Sensor
    GM1786225Courtesy of GENERAL MOTORS CORP.
  1. Install the front air bag sensor.
  2. NOTE: Refer to Fastener Notice .
  3. Install the front air bag sensor mounting bolt (2).

    Tighten:  Tighten the side air bag sensor mounting bolts to 10 N.m (89 lb in).

  4. Connect the connector (1) to the front air bag sensor (3).
  5. Connect the negative battery cable.