LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Repair Instructions >> Heater Hoses Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Hoses
    GM1241693Courtesy of GENERAL MOTORS CORP.
  1. Install the left heater hose to the coolant inlet line fitting. Slide the end of the heater hose over the coolant fitting until the hose is seated.
  2. Install the right heater hose to the fitting below the intake manifold. Slide the end of the heater hose over the fitting until it is seated.
  3. Install and seat the other end of each heater hose.
  4. Compress and slide the spring clamps into position on the heater hoses and release the tension on the spring clamps.
    5. Fig 2: Heater Hoses At Heater Core
    GM1251914Courtesy of GENERAL MOTORS CORP.
  5. Filling the cooling system.
  6. Check the hoses for leaks.
scientia non olet · About LEMON Manuals