LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Manual >> Repair Instructions >> Blower Motor Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Blower Motor Switch & Knob Mount Support
    GM1251930Courtesy of GENERAL MOTORS CORP.
  1. Install the spring and the electrical contact washer over the blower switch knob post.
  2. Align the contact key with the post keyway.
  3. Position the switch assembly over the mount posts.
  4. Install the switch assembly with the screws.
  5. Connect the electrical connectors to the rear of the control assembly.
  6. Install the HVAC control assembly. Refer to HVAC Control Assembly Replacement .
  7. Connect the negative battery cable.
  8. Perform an operational check of the blower switch positions.
scientia non olet · About LEMON Manuals