Conditions for Setting the DTC
This DTC will set if the output of the in-car sensor indicates a probable short circuit or an open in the sensor or the associated wiring harness, or a malfunction of the automatic temperature control (ATC) controller.
DTC 1
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 |
|
2600-2100 Ω | Go to Step 2 | Go to Step 3 |
| 2 | Repair the damaged wiring or the connector, or replace the in-car sensor as required. Did you find and correct the condition? |
- | System OK | - |
| 3 |
|
4 V | Go to Step 7 | Go to Step 4 |
| 4 | Inspect the terminals on the in-car sensor connector. Is any problem found with the connector? |
- | Go to Step 5 | Go to Step 6 |
| 5 | Repair the connector terminals or replace the in-car sensor or ATC controller as required. Did you find and correct the condition? |
- | System OK | - |
| 6 |
|
- | Go to Step 7 | System OK |
| 7 | Replace the ATC controller. Did you complete the replacement? |
- | System OK | - |