Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
- Install the floor console with the screws.
Tighten: Tighten the floor console screws to 4 N.m (35 lb in).
- Install the parking brake cover.
- Install the floor console cover.
- Install the gearshift lever boot, if equipped.
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
.