Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Stabilizer Shaft-To-Knuckle Nut & Shaft-To-Link Nut

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Vehicle Lifting and Jacking Notice .

Lift and suitably support the vehicle, allowing the front suspension to hang free.
Remove the front wheel. Refer to Tire and Wheel Removal and Installation .
Remove the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

Fig 2: Stabilizer Shaft & Stabilizer Shaft Link Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the stabilizer shaft from the knuckle by removing the stabilizer shaft link assembly.