LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Blower Motor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Blower Motor Electrical Connector
    GM1251905Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the blower motor and seal, with the shock mount pads, in the heater/air distribution case. Hold the blower motor in position.
  2. Install the screws to secure the blower motor to the heater/air distribution case.

    Tighten:  Tighten the blower motor retaining screws to 6 N.m (53 lb in).

  3. Install the blower motor cooling hose.
  4. Connect the electrical connector.
  5. Connect the negative battery cable.
  6. Confirm that the blower motor operates properly.
scientia non olet · About LEMON Manuals