LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Front Side Door Trim Panel Replacement (Hatchback) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Trim Panel
    GM1248475Courtesy of GENERAL MOTORS CORP.
  1. Install the trim panel.
  2. NOTE: Refer to Fastener Notice .
  3. Install the screws at the base of the trim panel.

    Tighten:  Tighten the trim panel screws to 3.5 N.m (31 lb in).

  4. Install the inside door handle.
  5. Fig 2: View of Door Pull Screw
    GM1248473Courtesy of GENERAL MOTORS CORP.
  6. Install the door pull screw.

    Tighten:  Tighten the door pull screw to 3.5 N.m (31 lb in).

  7. Raise the window.