LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Interior Trim And Paneling) >> Repair Instructions >> Center Pillar Upper Trim Panel Replacement (Notchback) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Upper Front Seat Belt Anchor
    GM1248477Courtesy of GENERAL MOTORS CORP.
  1. Install the upper center pillar trim panel.
  2. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Notchback)  or Center Pillar Lower Trim Panel Replacement (Hatchback) .
  3. NOTE: Refer to Fastener Notice .
  4. Install the upper front seat belt anchor with the bolt.

    Tighten:  Tighten the seat belt anchor bolt to 38 N.m (28 lb ft).