Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Center Pillar Trim Panel

Courtesy of GENERAL MOTORS CORP.

Install the upper center pillar trim panel.

Fig 2: View of Lower Center Pillar Trim Panel, Seat Belt Bracket, and Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the seat belt bracket with the screws.
Tighten: Tighten the seat belt bracket screws to 10 N.m (89 lb in).

Fig 3: View of Upper Front Seat Belt Anchor

Courtesy of GENERAL MOTORS CORP.

Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Notchback) or Center Pillar Lower Trim Panel Replacement (Hatchback) .
Install the upper front seat belt anchor with the bolt.
Tighten: Tighten the seat belt anchor bolt to 38 N.m (28 lb ft).