LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pilot Bearing Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pressure Plate, Clutch Disc & J 35271
    GM1375552Courtesy of GENERAL MOTORS CORP.
  1. Remove the transaxle from the vehicle. Refer to Transmission Replacement for the D16 transaxle or Transmission Replacement for the Y4M transaxle.
  2. Install the J 35271  (2) to the flywheel. See Special Tools .
  3. Remove the pressure plate and the clutch disc. Refer to Clutch, Pressure Plate, and Pilot Bearing Replacement .
    4. Fig 2: Removing Transmission Input Shaft Bearing From Crankshaft Using J 23907
    GM1375553Courtesy of GENERAL MOTORS CORP.
    CAUTION: Wear safety glasses in order to avoid eye damage.
  4. Remove the transmission input shaft bearing from the crankshaft using the J 23907  (1). See Special Tools .
scientia non olet · About LEMON Manuals