Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressure Line Pipe, Supply Line Hose, Inlet/Outlet Connections & Power Steering Pump

Courtesy of GENERAL MOTORS CORP.

Siphon the power steering fluid from the fluid reservoir.
Disconnect the pressure line pipe and the supply line hose from the inlet and outlet connections on the power steering pump.
Remove the air cleaner housing, if needed.

Fig 2: Pressure Line, Return Line Hoses, Retaining Clips & Radiator

Courtesy of GENERAL MOTORS CORP.

Disconnect the pressure line and return line hoses from the retaining clips at the bottom and the side of the radiator.

Fig 3: Pressure Line Inlet Pipe & Steering Gear

Courtesy of GENERAL MOTORS CORP.

Disconnect the pressure line inlet pipe from the steering gear.

Fig 4: Power Steering Fluid & Fluid Reservoir

Courtesy of GENERAL MOTORS CORP.

Disconnect the supply line hose from the power steering fluid reservoir.
Remove the power steering pump pressure line and return line.