Adjusting Belt Tension
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- With the J 23600-B on the pump drive belt, loosen the alternator adjusting bolt and move the alternator until the gage indicates the proper tension. See Special Tools .
- Tighten the alternator adjusting bolt.
Tighten: Tighten the alternator adjusting bolt to 20 N.m (15 lb ft).
NOTE:
Refer to Fastener Notice
.