Circuit/System Testing
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel fill cap. Observe with a scan tool the FTP sensor pressure parameter. Verify the scan tool FTP sensor pressure parameter is 0 inches H2O.
- If less than the specified value replace the FTP sensor.
- Install the fuel fill cap.
- Engine idling command the EVAP vent closed. Increase the engine speed to 1,200-1,500 RPM. Observe with a scan tool the FTP sensor pressure parameter.
- Verify the scan tool FTP sensor pressure parameter is 0 H2O.
- If less than the specified value replace the Evaporative Emission Canister Purge Solenoid Valve.