Circuit/System Verification
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- With a scan tool, command the EVAP Purge Solenoid to 100 percent, and back to 0 percent. The EVAP Purge Solenoid should respond to the scan tool commands.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.