LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Controls And Fuel - 1.6L - Introduction (2 Of 2)) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Air Temperature Sensor Connector
    GM1915906Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature sensor connector.
  3. Remove the air cleaner inlet duct from the throttle body.
    4. Fig 2: Coolant Hoses At Throttle Body
    GM1917288Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electronic throttle body connector.
  5. Disconnect the coolant hoses from the electronic throttle body.
    6. Fig 3: Throttle Body Retaining Bolts
    GM1917304Courtesy of GENERAL MOTORS CORP.
  6. Remove the throttle body retaining bolts.
  7. Remove the throttle body and discard the gasket.
scientia non olet · About LEMON Manuals