LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Controls And Fuel - 1.6L - Introduction (2 Of 2)) >> Repair Instructions >> Knock Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Manifold Bracket Bolts And Bracket
    GM1922090Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the intake manifold bracket bolts and bracket.
    3. Fig 2: Knock Sensor (KS) Electrical Connector
    GM1922092Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the knock sensor (KS) electrical connector.
  4. Remove the Knock sensor bolt.
  5. Remove the knock sensor.
scientia non olet · About LEMON Manuals