Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Wheelhousing Bracket Brake Hose and E-Ring Retainer

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Vehicle Lifting and Jacking Notice .

Raise and support the vehicle.
Disconnect the brake line from the brake hose support bracket on the wheel housing.
Remove the E-ring retainer.
Remove the brake hose from the wheelhousing bracket.

Fig 2: View of Brake Caliper, Seal Rings, and Brake Hose

Courtesy of GENERAL MOTORS CORP.

Remove the bolt from the brake caliper.
Remove the seal rings and the brake hose.