LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Cooling System) >> Repair Instructions >> Coolant Pump Replacement (1.4L/1.6L DOHC) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Coolant Pump And Seal Ring
    GM1291096Courtesy of GENERAL MOTORS CORP.
  1. Install a new seal ring to the coolant pump.
  2. Coat the sealing surface of the seal ring with Lubriplater®.
  3. Install the coolant pump to the engine block with the flange aligned with the recess of the rear timing belt cover.
    NOTE: Refer to Fastener Notice .
  4. Install the coolant pump mounting bolts.

    Tighten:  Tighten the coolant pump mounting bolts to 10 N.m (89 lb in).

    5. Fig 2: View Of Rear Timing Belt Cover
    GM1291234Courtesy of GENERAL MOTORS CORP.
  5. Install the rear timing belt cover. Refer to Timing Belt Cover Replacement for the 1.6L (L91) engine.
  6. Fill the engine cooling system. Refer to Cooling System Draining and Filling .
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals