Removal Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Raise and suitably support the vehicle.
- Disconnect the electrical connector for the rear wheel speed sensor from the rear axle.
- Remove the mounting bolt from the rear wheel speed sensor.
- Remove the cable grommets from the rear wheel speed sensor, and remove the speed sensor.
CAUTION:
Refer to Battery Disconnect Caution
.
NOTE:
Refer to Vehicle Lifting and Jacking Notice
.