LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Door Lock Systems & Door Handles) >> Repair Instructions >> Rear Compartment Lid Interior Release Latch Handle Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Cable From Lock Striker
    GM1252083Courtesy of GENERAL MOTORS CORP.
  1. Open the luggage compartment.
  2. Remove the luggage compartment rear trim panels. Refer to Rear Compartment Trim Panel Replacement (Notchback) or Rear Compartment Trim Panel Replacement (Hatchback) .
  3. Remove the lock striker. Refer to Rear Compartment Lid Latch Striker Replacement .
  4. Disconnect the cable from the lock striker.
    5. Fig 2: View of Bolt and Handle
    GM1252078Courtesy of GENERAL MOTORS CORP.
  5. Remove the driver front and the rear seats. Refer to Front Seat Replacement - Bucket and Rear Seat Back Replacement .
  6. Reposition the floor carpet on the left side of the vehicle.
  7. Remove the bolt and the handle.
    8. Fig 3: View of Cable From Handle
    GM1252079Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the cable from the handle.
  9. Remove the cable.
scientia non olet · About LEMON Manuals