LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Fascia Replacement (Notchback) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Wheel Well Splash Shield
    GM1719817Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the necessary screws, the retainers, and nuts, from the front wheel well splash shields.
    3. Fig 2: Front Wheel Well Screws
    GM1720302Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  3. Remove the headlamps, the front side marker lamp, and the front fog lamps. Refer to Headlamp Replacement (Notchback) or Headlamp Replacement (Hatchback) , Front Side Marker Lamp Replacement and Front Fog Lamp Replacement (Notchback) or Front Fog Lamp Replacement (Hatchback) .
  4. Remove the screws from the wheel wells.
  5. Remove the retainers from the upper fascia.
  6. Remove the screws attaching the fascia to the fender.
  7. Remove the retainers from underneath the fascia.
    8. Fig 3: Screws On Top Of Front Bumper Fascia
    GM1720307Courtesy of GENERAL MOTORS CORP.
  8. Remove the retainers on the top of the fascia.
  9. Remove the front bumper fascia.
scientia non olet · About LEMON Manuals