LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Fascia Replacement (Hatchback) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Screws, Bolts, Nuts, and Front Wheel Well Splash Shields
    GM1248501Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the necessary screws, bolts, and nuts, from the front wheel well splash shields.
    3. Fig 2: View of Screws Underneath Fascia
    GM1248502Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  3. Remove the headlamps, the turn signal lamps, the side turn signal lamps and the front fog lamps.

    Refer to Headlamp Replacement (Notchback) or Headlamp Replacement (Hatchback) , Front Side Marker Lamp Replacement and Front Fog Lamp Replacement (Notchback) or Front Fog Lamp Replacement (Hatchback) .

  4. Remove the screws from the wheel wells.
  5. Remove the nuts from the fascia.
  6. Remove the screws from underneath the fascia.
    7. Fig 3: View of Front Bumper Fascia
    GM1248503Courtesy of GENERAL MOTORS CORP.
  7. Remove the screws on the top of the fascia.
  8. Remove the front bumper fascia.
scientia non olet · About LEMON Manuals