Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Knob, Seat Belt Anchors & Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the seat belt anchors with the bolts.
Tighten: Tighten the seat belt anchor bolts to 38 N.m (28 lb ft).
Install the rear center seat belt retractor with the bolt.
Tighten: Tighten the rear center seat belt retractor bolt to 38 N.m (28 lb ft).
Install the rear cargo area trim panel and unfold the rear seat.