Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the glass in the door.
- Install the guide rail and the bolts.
Tighten: Tighten the guide rail bolts to 7 N.m (62 lb in).
- Install the glass to the window regulator with the screws.
Tighten: Tighten the door glass screws to 7 N.m (62 lb in).
- Install the outside channel molding. Refer to Front Side Door Window Channel Replacement .
- Install the door seal trim. Refer to Door Water Deflector Replacement .
- Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement (Notchback) or Front Side Door Trim Panel Replacement (Hatchback) .
NOTE:
Refer to Fastener Notice
.