Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Screws and Clock

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the clock with the screws.
Tighten: Tighten the clock screws to 2.5 N.m (23 lb in).
Install the instrument panel center upper cover.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .