LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Steering Wheel & Steering Column) >> Repair Instructions >> Turn Signal Multifunction Switch Replacement (Hatchback) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Instrumental Panel Lower Cover
    GM1248378Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the lower steering column cover panel screws.
  3. Turn the steering wheel in order to access the upper steering column cover panel screws. Remove the upper steering column cover panel screws.
  4. Remove the upper and the lower steering column cover panels.
  5. Fig 2: Electrical Connections & Turn Signal Switch
    GM1248381Courtesy of GENERAL MOTORS CORP.
  6. Remove the turn signal switch by pushing in on the tabs on either side of the switch housing.
  7. Disconnect the electrical connectors from the turn signal switch.