LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Steering Wheel & Steering Column) >> Repair Instructions >> Turn Signal Multifunction Switch Replacement (Hatchback) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connections & Turn Signal Switch
    GM1248382Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the turn signal switch.
  2. Install the turn signal switch into the switch housing.
    3. Fig 2: View of Instrumental Panel Lower Cover
    GM1248378Courtesy of GENERAL MOTORS CORP.
  3. Install the upper and the lower steering column cover panels.
    4. NOTE: Refer to Fastener Notice .
  4. Install the lower steering column cover panel screws.

    Tighten:  Tighten the lower steering column cover panel screws to 3 N.m (27 lb in).

  5. Turn the steering wheel in order to access the upper steering column cover panel screw holes. Install the upper steering column cover panel screws.

    Tighten:  Tighten the upper steering column cover panel screws to 3 N.m (27 lb in).

  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals