Condition for Running the DTC

DTCs P0107, P0108, P0110, P0111, P0112, P0113, P0116, P0117, P0118, P0125, P0217, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0300, P0335, P0336, P0351, P0352, P0444, P0445, P0502, P0562, P0563, or P2110 are not set.
The engine is running.
Valid BARO update.
The traction control is not active.
The torque converter clutch (TCC) is steady (A/T).
The A/C compressor clutch is steady.
The coolant temperature is more than -10°C (14°F).
The engine speed is between 1,300-4,500 RPM.
The change in engine speed is less than 200 RPM.
The change in idle air is less than 5 percent.
The change in throttle position (TP) is less than 3 percent, or the change in MAP is less than 5 percent.
The change in exhaust gas recirculation (EGR) position is less than 6 percent.
The above conditions are stabilized for 1.5 seconds.
The DTC runs continuously when the above conditions are met.