LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - DTC P0016 To P0317 >> DTC P0016 or P0340 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the CMP sensor.
  2. Ignition ON, verify that a test lamp illuminates between the ignition 1 voltage circuit and ground.
    • If the test lamp does not illuminate, test the ignition 1 voltage circuit for a short to ground or an open/high resistance. If the circuit tests normal and the ignition 1 voltage circuit fuse is open, test all components connected to the ignition 1 voltage circuit and replace as necessary.
  3. Connect a test lamp between the ground circuit and the ignition 1 voltage circuit. Verify the test lamp illuminates.
    • If the test lamp does not illuminate, repair the open/high resistance on the ground circuit.
  4. Ignition ON, test for 4.8-5.2 volts between the signal circuit and the ground circuit.
    • If less than 4.8 volts, test the signal circuit for a short to ground or an open/high resistance. If the circuits/connections test normal, replace the ECM.
    • If greater than 5.2 volts, test the signal circuit for a short to voltage. If the circuits/connections test normal, replace the ECM.
  5. If all circuits/connections test normal, replace the CMP sensor.
scientia non olet · About LEMON Manuals