Fuel Pressure ReliefFuel Pressure Gage Installation and Removal
- Remove the fuel cap.
- Remove the fuel pump fuse EF10 from the engine fuse box.
- Start the engine and allow the engine to stall.
- Crank the engine for an additional 10 seconds.
CAUTION:
Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.