LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Evaporative Emission Canister ReplacementRemoval Procedure >> Removal ProcedureInstallation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal ProcedureInstallation Procedure

    Fig 1: Identifying Canister Flange to Vehicle Bolt
    GM1289477Courtesy of GENERAL MOTORS CORP.
    CAUTION: Do not allow smoking or the use of open flames in the area where work on the fuel or EVAP system is taking place. Anytime work is being done on the fuel system, disconnect the negative battery cable, except for those tests where battery voltage is required.
  1. Remove the bolt that secures the canister flange to the vehicle.
  2. Slide the canister out of the track holder.
  3. Disconnect the canister fuel vapor hoses.
  4. Remove the canister cover.
  5. Remove the canister.
scientia non olet · About LEMON Manuals