LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.6L >> Repair Instructions >> Oil Pump Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Oil Pressure Switch
    GM1371908Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the timing belt. Refer to Timing Belt Replacement .
  3. Remove the rear timing belt cover. Refer to Timing Belt Cover Replacement .
  4. Disconnect the oil pressure switch connector.
    5. Fig 2: View Of Oil Pump/Pickup Tube And Bolts
    GM1241642Courtesy of GENERAL MOTORS CORP.
  5. Remove the crankshaft position (CKP) sensor bolt.
  6. Remove the CKP sensor.
  7. Remove the oil pan. Refer to Oil Pan Replacement .
  8. Remove the oil pump pickup tube and the support bracket bolts.
  9. Remove the oil pump pickup tube.
    10. Fig 3: Identifying Oil Pump Retaining Bolts
    GM1241645Courtesy of GENERAL MOTORS CORP.
  10. Remove the oil pump retaining bolts (1).
    11. CAUTION: Refer to Safety Glasses Caution .
  11. Carefully separate the oil pump and the gasket from the engine block and the oil pan.
  12. Remove the oil pump.
scientia non olet · About LEMON Manuals