LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Pump Replacement (1.4L/1.6L DOHC) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing & Removing Coolant Pump And Seal Ring
    GM1291096Courtesy of GENERAL MOTORS CORP.
  1. Install a new seal ring to the coolant pump.
  2. Coat the sealing surface of the seal ring with Lubriplater®.
  3. Install the coolant pump to the engine block with the flange aligned with the recess of the rear timing belt cover.
    NOTE: Refer to Fastener Notice .
  4. Install the coolant pump mounting bolts.

    Tighten:  Tighten the coolant pump mounting bolts to 10 N.m (89 lb in).

    5. Fig 2: View Of Rear Timing Belt Cover
    GM1291234Courtesy of GENERAL MOTORS CORP.
  5. Install the rear timing belt cover. Refer to Timing Belt Cover Replacement .
  6. Fill the engine cooling system. Refer to Draining and Filling Cooling System .
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals