LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Pump Replacement (1.4/1.5L SOHC) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing Coolant Pump Ring Seal
    GM1241818Courtesy of GENERAL MOTORS CORP.
  1. Install a new ring seal to the coolant pump.
  2. Coat the sealing surface of the ring seal with Lubriplate®.
  3. Install the coolant pump to the engine block.
    4. NOTE: Refer to Fastener Notice .
  4. Secure the coolant pump to the engine block with the mounting bolts.

    Tighten:  Tighten the coolant pump mounting bolts to 10 N.m (89 lb in).

  5. Install the rear timing belt rear hood. Refer to Timing Belt Replacement.
  6. Refill the engine cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals